{"id":"dmg-mori-dmu-270-p-fd","model_id":"DMU 270 P (FD)","name":"DMG MORI DMU 270 P (FD)","summary":"The DMU 270 P (FD) is a DECKEL MAHO portal (gantry) machining centre that performs milling and turning in one setup on a DirectDrive rotary table. It has 2,700 mm of X and Y stroke and 1,600 mm of Z stroke, and accepts workpieces up to 3,400 mm diameter. The machine uses a gantry design with a vertically moving cross beam, hydraulic weight compensation and a three-point support bed that requires no foundation.","study_notes":["Milling and turning are combined in one setup on a DirectDrive table with torque up to 11,000 Nm.","Control and software alternatives listed on the page: SIEMENS and HEIDENHAIN.","Feed speed up to 60,000 mm/min and acceleration up to 5 m/s².","Maximum feed power is stated as up to 45 kN.","Spindle options: powerMASTER motor spindle with up to 1,000 Nm, torqueMASTER gear spindle with 1,800 Nm.","Wheel-type tool magazine holds up to 243 tools.","Work area: max. workpiece diameter 3,400 mm, max. workpiece height 1,960 mm.","Standard positioning accuracy down to 12 µm; 9 µm with the accuracy pack option; 6 µm with the µPrecision variant.","Gantry design with vertically moving cross beam and hydraulic weight compensation; three-point support on the machine bed, no foundation required.","Band filter unit with 2,500 l capacity is standard; feed drives are water-cooled.","Technical grinding can be integrated into the machine for surface quality."],"safety_notes":["Maximum workpiece weight is 12,000 kg; for Type FD the maximum workpiece weight is 7,000 kg.","Machine requires no foundation; it is supported at three points on an inherently stiff machine bed."],"sources":[{"url":"https://en.dmgmori.com/products/machines/milling/5-axis-milling/portal/dmu-270-p-fd","title":"DMU 270 P (FD) - 5 Axis Milling - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":5,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"dmg-mori","controllers":[],"travel_x_mm":2700,"travel_y_mm":2700,"travel_z_mm":1600,"tool_capacity":243,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-dmu-270-p-fd","license":"https://creativecommons.org/licenses/by/4.0/"}