# DMG MORI DMF 400|11 (FD, linear)

Hardware · `DMF 400|11 (FD, linear)` · verification: source checked

The DMF 400|11 (FD, linear) is a DMG MORI travelling column machining centre built for 5-axis simultaneous milling. Its linear axes travel 4,000 mm in X, 1,100 mm in Y and 1,050 mm in Z, and it accepts workpieces up to 8,000 kg. Options include an integrated rotary table for 5-axis work, a B-axis for 4-axis work, mill-turn operation and a dynamic package with a linear drive in the X-axis.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 5 |
| Travel X | 4000 mm |
| Travel Y | 1100 mm |
| Travel Z | 1050 mm |
| Spindle taper | SK40/HSK-A63, SK50/HSK-A100 |
| Tool capacity | 120 |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Study notes

- Workpiece envelope stated as max length 4,600 mm, max width 1,100 mm, max diameter 1,400 mm and max height 1,100 mm; max workpiece weight is 8,000 kg (17,637 lbs).
- Spindles are offered from 12,000 to 20,000 rpm with torque up to 430 Nm; taper variants are SK40/HSK-A63 and SK50/HSK-A100.
- Tool magazine holds up to 120 pockets; maximum tool length is 400 mm (540 mm for HSK-A100).
- Control and software alternatives listed are SIEMENS and HEIDENHAIN; no controller match exists in the reference list.
- 4-axis machining uses a B-axis; 5-axis machining uses an optional integrated rotary table; mill-turn technology is an option.
- Machine bed is a single cast iron piece with three linear guideways in the X-axis; ball screws are internally cooled and ground, with helical toothed belts.
- Dynamic package adds a linear drive in the X-axis and higher acceleration and feed rate in X, Y and Z.
- Tool change takes place outside the working area; an optional partition wall allows pendulum machining.
- Automation options: interface for robot handling (one working area) and interface for pendulum machining with partition wall, in VERTICO design.

## Sources

1. [DMF 400|11 (FD, linear) - 5 Axis Milling - DMG MORI](https://en.dmgmori.com/products/machines/milling/5-axis-milling/dmf/dmf-400-11-fd) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-dmf-400-11-fd-linear  
JSON: https://machineschema.com/hardware/dmg-mori-dmf-400-11-fd-linear.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.