{"id":"dmg-mori-dmf-400-11-fd-linear","model_id":"DMF 400|11 (FD, linear)","name":"DMG MORI DMF 400|11 (FD, linear)","summary":"The DMF 400|11 (FD, linear) is a DMG MORI travelling column machining centre built for 5-axis simultaneous milling. Its linear axes travel 4,000 mm in X, 1,100 mm in Y and 1,050 mm in Z, and it accepts workpieces up to 8,000 kg. Options include an integrated rotary table for 5-axis work, a B-axis for 4-axis work, mill-turn operation and a dynamic package with a linear drive in the X-axis.","study_notes":["Workpiece envelope stated as max length 4,600 mm, max width 1,100 mm, max diameter 1,400 mm and max height 1,100 mm; max workpiece weight is 8,000 kg (17,637 lbs).","Spindles are offered from 12,000 to 20,000 rpm with torque up to 430 Nm; taper variants are SK40/HSK-A63 and SK50/HSK-A100.","Tool magazine holds up to 120 pockets; maximum tool length is 400 mm (540 mm for HSK-A100).","Control and software alternatives listed are SIEMENS and HEIDENHAIN; no controller match exists in the reference list.","4-axis machining uses a B-axis; 5-axis machining uses an optional integrated rotary table; mill-turn technology is an option.","Machine bed is a single cast iron piece with three linear guideways in the X-axis; ball screws are internally cooled and ground, with helical toothed belts.","Dynamic package adds a linear drive in the X-axis and higher acceleration and feed rate in X, Y and Z.","Tool change takes place outside the working area; an optional partition wall allows pendulum machining.","Automation options: interface for robot handling (one working area) and interface for pendulum machining with partition wall, in VERTICO design."],"safety_notes":[],"sources":[{"url":"https://en.dmgmori.com/products/machines/milling/5-axis-milling/dmf/dmf-400-11-fd","title":"DMF 400|11 (FD, linear) - 5 Axis Milling - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":4000,"travel_y_mm":1100,"travel_z_mm":1050,"spindle_taper":"SK40/HSK-A63, SK50/HSK-A100","tool_capacity":120,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-dmf-400-11-fd-linear","license":"https://creativecommons.org/licenses/by/4.0/"}