# DMG MORI DMF 300|11 (FD, linear)

Hardware · `DMF 300|11 (FD, linear)` · verification: source checked

The DMF 300|11 (FD, linear) is a traveling column machine built for 5-axis simultaneous machining, with X, Y and Z strokes of 3,000 mm, 1,100 mm and 1,050 mm. Its spindle runs from 12,000 to 20,000 rpm with SK40/HSK-A63 or SK50/HSK-A100 tool interfaces and up to 430 Nm torque. It is offered with SIEMENS or HEIDENHAIN control and handles workpieces up to 6,000 kg.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 5 |
| Travel X | 3000 mm |
| Travel Y | 1100 mm |
| Travel Z | 1050 mm |
| Spindle max | 20000 rpm |
| Spindle taper | SK40/HSK-A63, SK50/HSK-A100 |
| Tool capacity | 120 |
| Table load | 6000 kg |

## Connected

- Manufacturer: [DMG MORI](https://machineschema.com/manufacturer/dmg-mori.md)

## Safety

- Tool change is collision-free and occurs outside the working area.

## Study notes

- Control and software alternatives named in the document are SIEMENS and HEIDENHAIN; neither appears in the controller reference list.
- Two spindle interfaces are offered: SK40/HSK-A63 and SK50/HSK-A100, with spindle torque up to 430 Nm.
- Tool magazine holds up to 120 pockets; maximum tool length is 400 mm, or 540 mm for HSK-A100.
- Optional configurations: 4-axis machining with B-axis, 5-axis machining with integrated rotary table, and mill-turn technology for complex geometries.
- Optional dynamic package adds a linear drive in the X-axis plus higher acceleration and feed rates in the X, Y and Z axes.
- Machine bed is a single cast iron piece with three linear guideways in the X-axis; internal-cooled ballscrews and ground ball screws with helical toothed belt are used in all axes.
- Tool change is collision-free and takes place outside the working area.
- An optional partition wall is offered to reduce downtime.
- Workpiece limits stated: length 3,600 mm, width 1,100 mm, diameter 1,400 mm, height 1,100 mm.
- DMG MORI Technology Cycles such as angularTOOL are stated to increase productivity.

## Sources

1. [DMF 300|11 (FD, linear) - 5 Axis Milling - DMG MORI](https://en.dmgmori.com/products/machines/milling/5-axis-milling/dmf/dmf-300-11-fd) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/dmg-mori-dmf-300-11-fd-linear  
JSON: https://machineschema.com/hardware/dmg-mori-dmf-300-11-fd-linear.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.