{"id":"dmg-mori-dmf-300-11-fd-linear","model_id":"DMF 300|11 (FD, linear)","name":"DMG MORI DMF 300|11 (FD, linear)","summary":"The DMF 300|11 (FD, linear) is a traveling column machine built for 5-axis simultaneous machining, with X, Y and Z strokes of 3,000 mm, 1,100 mm and 1,050 mm. Its spindle runs from 12,000 to 20,000 rpm with SK40/HSK-A63 or SK50/HSK-A100 tool interfaces and up to 430 Nm torque. It is offered with SIEMENS or HEIDENHAIN control and handles workpieces up to 6,000 kg.","study_notes":["Control and software alternatives named in the document are SIEMENS and HEIDENHAIN; neither appears in the controller reference list.","Two spindle interfaces are offered: SK40/HSK-A63 and SK50/HSK-A100, with spindle torque up to 430 Nm.","Tool magazine holds up to 120 pockets; maximum tool length is 400 mm, or 540 mm for HSK-A100.","Optional configurations: 4-axis machining with B-axis, 5-axis machining with integrated rotary table, and mill-turn technology for complex geometries.","Optional dynamic package adds a linear drive in the X-axis plus higher acceleration and feed rates in the X, Y and Z axes.","Machine bed is a single cast iron piece with three linear guideways in the X-axis; internal-cooled ballscrews and ground ball screws with helical toothed belt are used in all axes.","Tool change is collision-free and takes place outside the working area.","An optional partition wall is offered to reduce downtime.","Workpiece limits stated: length 3,600 mm, width 1,100 mm, diameter 1,400 mm, height 1,100 mm.","DMG MORI Technology Cycles such as angularTOOL are stated to increase productivity."],"safety_notes":["Tool change is collision-free and occurs outside the working area."],"sources":[{"url":"https://en.dmgmori.com/products/machines/milling/5-axis-milling/dmf/dmf-300-11-fd","title":"DMF 300|11 (FD, linear) - 5 Axis Milling - DMG MORI","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":9,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"dmg-mori","controllers":[],"axes":5,"travel_x_mm":3000,"travel_y_mm":1100,"travel_z_mm":1050,"spindle_max_rpm":20000,"spindle_taper":"SK40/HSK-A63, SK50/HSK-A100","tool_capacity":120,"table_load_kg":6000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/dmg-mori-dmf-300-11-fd-linear","license":"https://creativecommons.org/licenses/by/4.0/"}