{"id":"chiron-micro5-xl","model_id":"Micro5 XL","name":"CHIRON Micro5 XL","summary":"The Micro5 XL is a five-axis CNC milling machine for micro-machining. It has 170 mm X, 140 mm Y and 120 mm Z travels and an HSK-E25 milling spindle. The machine uses a tower tool magazine and is intended for small cubic workpieces.","study_notes":["CHIRON lists chip-to-chip time as 3.9 s.","Milling spindle speed is listed as 40,000 rpm or 50,000 rpm.","Tower magazine capacity is listed as 60 or 100 tools.","Maximum tool diameter is 30 mm; with free secondary space it is 65 mm.","Maximum axis acceleration is 15 m/s² in X and Y and 20 m/s² in Z.","Number of milling spindles: 1.","Minimum footprint including peripherals: 1.7 m².","Maximum machining cube side length: 120 mm."],"safety_notes":[],"sources":[{"url":"https://chiron-group.com/products/micro5xl","title":"Micro5 XL","accessed":"2026-10-26"},{"url":"https://chiron-group.com/storage/technicaldata/en/cg_a4h_machinedata_website_2026_micro5-xl_2.pdf","title":"cg a4h machinedata website 2026 micro5 xl 2","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":8,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"chiron","controllers":[],"axes":5,"travel_x_mm":170,"travel_y_mm":140,"travel_z_mm":120,"spindle_taper":"HSK-E25","rapid_traverse_m_min":30,"spindle_torque_nm":1.8,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/chiron-micro5-xl","license":"https://creativecommons.org/licenses/by/4.0/"}