{"id":"chiron-dz-08","model_id":"DZ 08","name":"CHIRON DZ 08","summary":"The DZ 08 is a twin-spindle vertical machining centre of the CHIRON 08 Series with a 200 mm distance between the two milling spindles. Travels are 450 x 270 x 310 mm and the water-cooled motor spindles run from 18,000 to 40,000 rpm. A chain magazine supplies both spindles and chip-to-chip time is 2.8 s.","study_notes":["Two milling spindles with 200 mm spindle distance.","Chip-to-chip time 2.8 s.","Milling spindle speed 18,000 – 40,000 rpm; spindle torque 9 – 11 Nm.","Axis acceleration X – Y – Z max. 10 – 15 – 20 m/s2.","Chain magazine capacity stated as 2 x 16 tools.","Max. tool diameter 63 mm; max. tool length 160 mm; max. tool weight 1.2 kg.","Vertical moving column principle, steel/mineral-cast machine bed, fully enclosed working area."],"safety_notes":[],"sources":[{"url":"https://chiron-group.com/products/08-series","title":"Series 08 for micro machining purposes","accessed":"2026-10-26"},{"url":"https://chiron-group.com/storage/technicaldata/en/cg_a4h_machinedata_website_2026_br08.pdf","title":"cg a4h machinedata website 2026 br08","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":8,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"chiron","controllers":[],"travel_x_mm":450,"travel_y_mm":270,"travel_z_mm":310,"spindle_max_rpm":40000,"spindle_taper":"HSK-A40 (option HSK-E40)","rapid_traverse_m_min":75,"spindle_torque_nm":11,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/chiron-dz-08","license":"https://creativecommons.org/licenses/by/4.0/"}