{"id":"brother-w1000xd2","model_id":"W1000Xd2","name":"Brother W1000Xd2","summary":"The Brother W1000Xd2 is a vertical CNC machining center with a 30-taper spindle and travels of 1,000 mm on X, 500 mm on Y and 380 mm on Z. It runs the Brother CNC-D00 control and a 14/21/28-position tool magazine, with a standard spindle speed range of 1 to 12,000 min-1. A five-axis variant, the W1000Xd2-5AX, uses the CNC-D00v (DB) control and adds tool center point control for simultaneous five-axis machining.","study_notes":["CNC unit for the W1000Xd2 is CNC-D00; the W1000Xd2-5AX variant uses CNC-D00v (DB).","Standard spindle: 12,000 min-1, max torque 40 N·m, max output 18.9 kW. Optional 20,000 min-1: 27 N·m, 15.4 kW. Optional 10,000 min-1 high-torque: 92 N·m, 26.2 kW.","Main spindle motor for the 12,000 min-1 specification: 10.1/7.0 kW (10 min/continuous). Axis feed motors: X and Y 1.0 kW, Z 2.0 kW.","Tool storage capacity 14 / 21 / 28 tools. Max tool length 250 mm, max tool diameter ⌀110 mm, max tool weight 3.0 kg (4.0 kg with parameter change); total tool weight 25 kg for 14 tools, 35 kg for 21 or 28 tools.","Tool change times: tool-to-tool 0.6 s (14 or 21 tools) / 0.7 s (28 tools); chip-to-chip 1.3 s / 1.4 s.","Cutting feed rate 1 to 30,000 mm/min on X, Y and Z (value with high accuracy mode B).","Accuracy of bidirectional axis positioning (ISO230-2:1988) 0.006 to 0.020 mm; repeatability of bidirectional axis positioning (ISO230-2:2014) less than 0.004 mm.","Memory capacity 500 Mbytes (3 Gbytes optional), total capacity of program and data bank; up to 4,000 registrable programs.","Least input increment 0.001 mm / 0.0001 inch / 0.001 deg (0.0001 mm with optional submicron command).","Required floor space 2,410 x 2,233 mm with control unit door open, not including the coolant tank; machine height 2,633 mm.","Distance between table top and spindle nose end 150 to 530 mm.","Coolant Through Spindle (CTS) and BT dual contact spindle (BIG-PLUS) are options; CTS is selectable at 3 MPa or 7 MPa."],"safety_notes":["Max table loading capacity is 300 kg as standard; 500 kg requires a parameter change (table travel time is changed).","Max tool weight 4.0 kg requires a parameter change, which also changes tool indexing time.","Regular air pressure required: 0.4 to 0.6 MPa (recommended value 0.5 MPa); required flow 45 L/min. Set the pressure higher than the recommended value depending on machine specifications, machining program details, or peripheral equipment.","The machine may need to be equipped with a relocation detection device depending on the destination; those machines carry \"RD\" at the end of the model name.","Maximum tool length, diameter and weight are limited depending on spindle speed in use, configuration and center of gravity.","Only the W1000Xd2-5AX supports tool center point control, which is subject to restrictions on the axis configuration."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/w1000xd2","title":"W1000Xd2 | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":14,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"brother","controllers":[],"axes":5,"weight_kg":3350,"travel_x_mm":1000,"travel_y_mm":500,"travel_z_mm":380,"spindle_max_rpm":12000,"spindle_taper":"MAS-BT30","rapid_traverse_m_min":56,"table_length_mm":1100,"table_width_mm":500,"table_load_kg":300,"supply_voltage":"AC 200 to 230 V±10%, 3-phase, 50/60Hz±2%","joints":[],"protocols":["opc-ua"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-w1000xd2","license":"https://creativecommons.org/licenses/by/4.0/"}