# Brother W1000Xd2-5AX

Hardware · `W1000Xd2-5AX` · verification: source checked

The Brother W1000Xd2-5AX is a 5-axis vertical machining center with a BT30 spindle. It has X/Y/Z travels of 1000/500/380 mm, a 1100 x 500 mm table, and simultaneous 5-axis control for complex parts. The standard spindle reaches 12,000 min⁻¹, with optional 20,000 min⁻¹ and 10,000 min⁻¹ high-torque spindles.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 5 |
| Repeatability | 0.004 mm |
| Weight | 3350 kg |
| Travel X | 1000 mm |
| Travel Y | 500 mm |
| Travel Z | 380 mm |
| Spindle max | 12000 rpm |
| Spindle taper | MAS-BT30 |
| Rapid traverse | 56 m/min |
| Tool capacity | 28 |
| Table length | 1100 mm |
| Table width | 500 mm |
| Table load | 500 kg |
| Supply voltage | AC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2% |

## Connected

- Manufacturer: [Brother](https://machineschema.com/manufacturer/brother.md)
- Protocols: [OPC UA](https://machineschema.com/protocol/opc-ua.md)

## Safety

- Parameter setting changes are required to use the 500 kg table load or the 4.0 kg maximum tool weight.
- Regular air pressure must be 0.4–0.6 MPa (recommended 0.5 MPa) with required flow 45 L/min; set pressure higher than the recommended value as needed.
- Maximum tool length, diameter, and weight are limited by spindle speed, machine configuration, and tool center of gravity; the published figures are for reference only.
- A relocation detection device may be required depending on the destination; machines equipped with it have 'RD' at the end of the model name.

## Study notes

- CNC model is CNC-D00v (DB); conversation-language programming is not available on the 5AX variant.
- Control axes: 5 (X, Y, Z and two additional axes); simultaneous interpolation covers 5 axes.
- Standard spindle speed is 12,000 min⁻¹; optional spindles are 20,000 min⁻¹ and 10,000 min⁻¹ high-torque.
- Rapid traverse rates are X 50 m/min, Y 50 m/min, Z 56 m/min.
- Tool storage capacity options are 14, 21, or 28 tools.
- Table load capacity is 300 kg standard and 500 kg with a parameter setting change.
- Maximum tool weight is 3.0 kg standard (4.0 kg with parameter change); maximum tool length 250 mm; maximum tool diameter ø110 mm.
- Machine height is 2633 mm; required floor space is 2410 x 2233 mm (3071 mm with control unit door open).
- Positioning accuracy (ISO230-2:1988) is 0.006–0.020 mm.
- Spindle motor output for the 12,000 min⁻¹ specification is 10.1 kW for 10 min / 7.0 kW continuous; maximum output is 18.9 kW.
- Coolant Through Spindle (CTS) is optional at 3 MPa or 7 MPa; BT dual contact spindle (BIG-PLUS) is optional.
- Optional network slaves include PROFINET, EtherNet/IP, PROFIBUS DP, DeviceNet, and CC-Link; OPC UA is listed as standard.

## Sources

1. [W1000Xd2-5AX | Machine Tools | Brother](https://machinetool.global.brother/en-us/all-products/w1000xd2-5ax) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/brother-w1000xd2-5ax  
JSON: https://machineschema.com/hardware/brother-w1000xd2-5ax.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.