{"id":"brother-w1000xd2-5ax","model_id":"W1000Xd2-5AX","name":"Brother W1000Xd2-5AX","summary":"The Brother W1000Xd2-5AX is a 5-axis vertical machining center with a BT30 spindle. It has X/Y/Z travels of 1000/500/380 mm, a 1100 x 500 mm table, and simultaneous 5-axis control for complex parts. The standard spindle reaches 12,000 min⁻¹, with optional 20,000 min⁻¹ and 10,000 min⁻¹ high-torque spindles.","study_notes":["CNC model is CNC-D00v (DB); conversation-language programming is not available on the 5AX variant.","Control axes: 5 (X, Y, Z and two additional axes); simultaneous interpolation covers 5 axes.","Standard spindle speed is 12,000 min⁻¹; optional spindles are 20,000 min⁻¹ and 10,000 min⁻¹ high-torque.","Rapid traverse rates are X 50 m/min, Y 50 m/min, Z 56 m/min.","Tool storage capacity options are 14, 21, or 28 tools.","Table load capacity is 300 kg standard and 500 kg with a parameter setting change.","Maximum tool weight is 3.0 kg standard (4.0 kg with parameter change); maximum tool length 250 mm; maximum tool diameter ø110 mm.","Machine height is 2633 mm; required floor space is 2410 x 2233 mm (3071 mm with control unit door open).","Positioning accuracy (ISO230-2:1988) is 0.006–0.020 mm.","Spindle motor output for the 12,000 min⁻¹ specification is 10.1 kW for 10 min / 7.0 kW continuous; maximum output is 18.9 kW.","Coolant Through Spindle (CTS) is optional at 3 MPa or 7 MPa; BT dual contact spindle (BIG-PLUS) is optional.","Optional network slaves include PROFINET, EtherNet/IP, PROFIBUS DP, DeviceNet, and CC-Link; OPC UA is listed as standard."],"safety_notes":["Parameter setting changes are required to use the 500 kg table load or the 4.0 kg maximum tool weight.","Regular air pressure must be 0.4–0.6 MPa (recommended 0.5 MPa) with required flow 45 L/min; set pressure higher than the recommended value as needed.","Maximum tool length, diameter, and weight are limited by spindle speed, machine configuration, and tool center of gravity; the published figures are for reference only.","A relocation detection device may be required depending on the destination; machines equipped with it have 'RD' at the end of the model name."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/w1000xd2-5ax","title":"W1000Xd2-5AX | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":16,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"brother","controllers":[],"axes":5,"repeatability_mm":0.004,"weight_kg":3350,"travel_x_mm":1000,"travel_y_mm":500,"travel_z_mm":380,"spindle_max_rpm":12000,"spindle_taper":"MAS-BT30","rapid_traverse_m_min":56,"tool_capacity":28,"table_length_mm":1100,"table_width_mm":500,"table_load_kg":500,"supply_voltage":"AC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2%","joints":[],"protocols":["opc-ua"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-w1000xd2-5ax","license":"https://creativecommons.org/licenses/by/4.0/"}