{"id":"brother-u500xd1","model_id":"U500Xd1","name":"Brother U500Xd1","summary":"The Brother U500Xd1 is a vertical machining center with a tilting rotary table, three linear axes (X, Y, Z) and two rotary axes (A, C). It has 500 mm X travel, 400 mm Y travel, 300 mm Z travel, a 10,000 min⁻¹ spindle, and a 28-tool magazine. It is intended for multi-face machining of medium-sized workpieces.","study_notes":["CNC unit: CNC-D00 for U500Xd1; CNC-D00v (DB) for U500Xd1-5AX.","Optional spindle speed: 16,000 min⁻¹. Spindle motor output: 10.1/7.1 kW (10,000 min⁻¹ spec); 7.4/5.1 kW (16,000 min⁻¹ optional).","Tool storage capacity options: 14, 21, or 28 tools; max tool weight 3.0 kg (4.0 kg with parameter change).","Tool change time: tool-to-tool 0.6 s (14/21 tools) or 0.7 s (28 tools); chip-to-chip 1.2 s or 1.3 s.","Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min.","Table work area: ø260 mm; max loading capacity 100 kg.","A-axis clamp torque: 810 Nm; C-axis clamp torque: 560 Nm.","Memory capacity: 500 MB (3 GB optional) for U500Xd1; 3 GB for U500Xd1-5AX. Display: 15-inch color LCD touch display.","External communication: USB memory, Ethernet, RS232C (optional). OPC UA listed under network functions.","Power supply: AC 200–230 V ±10%, 3-phase, 50/60 Hz ±2%; power capacity 9.5 kVA. Air supply: 0.4–0.6 MPa, 55 L/min.","Machine weight: 2,650 kg. Accuracy: bidirectional positioning X/Y/Z 0.006–0.020 mm; repeatability <0.004 mm; A/C 28 sec / 16 sec or less.","Optional: BT dual contact spindle (BIG-PLUS), coolant through spindle (CTS). Tool center point control only on U500Xd1-5AX. Optional network slaves: PROFINET, EtherNet/IP, PROFIBUS DP, DeviceNet, CC-Link."],"safety_notes":["A relocation detection device may be required depending on the destination; machines equipped with it carry \"RD\" at the end of the model name."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/uxd1/u500xd1","title":"U500Xd1 | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":17,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"brother","controllers":[],"axes":5,"weight_kg":2650,"travel_x_mm":500,"travel_y_mm":400,"travel_z_mm":300,"spindle_max_rpm":10000,"spindle_taper":"7/24 tapered No.30","rapid_traverse_m_min":56,"tool_capacity":28,"table_load_kg":100,"supply_voltage":"AC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2%","joints":[{"name":"A","range_min_deg":-30,"range_max_deg":120},{"name":"C"}],"protocols":["opc-ua"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-u500xd1","license":"https://creativecommons.org/licenses/by/4.0/"}