# Brother S700Xd2-5AX

Hardware · `S700Xd2-5AX` · verification: source checked

The Brother SPEEDIO S700Xd2-5AX is a CNC machining center with X/Y/Z travels of 700/450/300 mm and a standard 12,000 min-1 spindle. It uses the CNC-D00v(DB) control for 5-axis positioning and simultaneous 5-axis machining, and accepts 14, 21, or 28 tools.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 5 |
| Weight | 2550 kg |
| Travel X | 700 mm |
| Travel Y | 450 mm |
| Travel Z | 300 mm |
| Spindle max | 12000 rpm |
| Spindle taper | MAS-BT30 |
| Rapid traverse | 56 m/min |
| Table length | 800 mm |
| Table width | 450 mm |
| Table load | 250 kg |
| Supply voltage | AC 200 to 230 V±10%, 3-phase, 50/60Hz±2% |

## Connected

- Manufacturer: [Brother](https://machineschema.com/manufacturer/brother.md)
- Protocols: [OPC UA](https://machineschema.com/protocol/opc-ua.md)
- Variants: [Brother S700Xd2-5AX/100T](https://machineschema.com/hardware/brother-s700xd2-5ax-100t.md)

## Safety

- The optional side shutter requires a safety fence.
- The 4.0 kg maximum tool weight is not available with the 27,000 min-1 spindle specification.
- Depending on destination, the machine must be equipped with a relocation detection device; such models carry the RD suffix.

## Study notes

- The S700Xd2-5AX uses the CNC-D00v(DB) control; the non-5AX S700Xd2 uses CNC-D00.
- Z-axis travel is 300 mm standard or 380 mm optional.
- Tool storage capacities are 14, 21, or 28 tools; the 28-tool magazine has a maximum tool diameter of 110 mm and a maximum tool weight of 4 kg with parameter setting change.
- Rapid traverse rates are 50 m/min in X, 50 m/min in Y, and 56 m/min in Z.
- The table work area is 800 x 450 mm with a 250 kg uniform load capacity; 400 kg is possible with parameter adjustment.
- Bidirectional axis positioning accuracy is 0.006-0.020 mm, and repeatability is less than 0.004 mm.
- Standard spindle speed is 12,000 min-1; optional spindle speeds are 10,000 min-1 high-torque, 20,000 min-1, and 27,000 min-1.
- The 100-tool magazine and chip conveyor are available only on the S700Xd2-100T.

## Sources

1. [S700Xd2-5AX | Machine Tools | Brother](https://machinetool.global.brother/en-us/all-products/sxd2/s700xd2-5ax) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/brother-s700xd2-5ax  
JSON: https://machineschema.com/hardware/brother-s700xd2-5ax.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.