# Brother S700Xd2-5AX/100T

Hardware · `S700Xd2-5AX/100T` · verification: source checked

The Brother S700Xd2-5AX/100T is a vertical machining center in the SPEEDIO series with simultaneous 5-axis capability and a 100-tool storage system. It has 700 mm X, 450 mm Y, and 380 mm Z travels, an 800 mm x 450 mm table, and a 12,000 min-1 spindle. It uses the CNC-D00v(DB) control and is intended for multi-face and high-mix small-lot machining.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 5 |
| Repeatability | 0.004 mm |
| Weight | 2700 kg |
| Travel X | 700 mm |
| Travel Y | 450 mm |
| Travel Z | 380 mm |
| Spindle max | 12000 rpm |
| Spindle taper | MAS-BT30 |
| Rapid traverse | 56 m/min |
| Tool capacity | 100 |
| Table length | 800 mm |
| Table width | 450 mm |
| Table load | 250 kg |
| Supply voltage | AC 200 to 230 V±10%, 3-phase, 50/60Hz±2% |

## Connected

- Manufacturer: [Brother](https://machineschema.com/manufacturer/brother.md)
- Protocols: [OPC UA](https://machineschema.com/protocol/opc-ua.md)
- Variant of: [Brother S700Xd2-5AX](https://machineschema.com/hardware/brother-s700xd2-5ax.md)

## Safety

- A side shutter for robotic loading/unloading requires a safety fence and cannot be selected for the S300Xd2.
- Depending on destination, the machine may need a relocation detection device; such models carry the RD suffix.
- The 27,000 min-1 spindle specification cannot be combined with Z-axis 380 mm models, and CTS cannot be selected with 27,000 min-1.
- Max tool weight 4.0 kg is not available with the 27,000 min-1 specification.

## Study notes

- CNC unit is CNC-D00v(DB) on the 5AX models; conversation language is not available.
- The 100-tool magazine uses a 28-tool turret plus left and right 36-tool stockers.
- Turret magazine tool change is 0.7 s tool-to-tool and 1.4 s chip-to-chip; tool stocker handling is about 5 s for one tool and about 140 s for all 28 tools.
- Rapid traverse is 50 m/min in X and Y and 56 m/min in Z; the spec field holds the fastest value.
- Optional spindle specifications are 10,000 min-1 high-torque and 20,000 min-1.
- Required floor space is 2,050 x 2,081 mm; machine height is 2,568 mm.
- Power supply is AC 200-230 V ±10%, 3-phase, 50/60 Hz ±2%; continuous power capacity is 10.4 kVA.
- Air supply is 0.4-0.6 MPa at 40 L/min.
- Bidirectional positioning accuracy is 0.006-0.020 mm (ISO 230-2:1988); repeatability is less than 0.004 mm (ISO 230-2:2014).
- Tool shank is MAS-BT30 with MAS-P30T-2 pull stud; BT dual contact (BIG-PLUS) and CTS are optional.
- OPC UA is available; PROFINET and EtherNet/IP slave are optional.
- Table load is 250 kg standard; 400 kg requires parameter adjustment.

## Sources

1. [S700Xd2-5AX/100T | Machine Tools | Brother](https://machinetool.global.brother/en-us/all-products/sxd2/s700xd2-5ax 100t) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/brother-s700xd2-5ax-100t  
JSON: https://machineschema.com/hardware/brother-s700xd2-5ax-100t.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.