{"id":"brother-s700xd2-100t","model_id":"S700Xd2-100T","name":"Brother S700Xd2-100T","summary":"The Brother S700Xd2-100T is a CNC machining center with X/Y/Z travels of 700/450/380 mm and an 800 × 450 mm table. It stores up to 100 tools in a 28-tool turret magazine plus left and right 36-tool stockers. It uses the CNC-D00 controller and a BT30 spindle with a standard 12,000 min-1 maximum speed.","study_notes":["Uses the CNC-D00 controller; the 5AX variants use the CNC-D00v(DB) controller.","The 100-tool magazine comprises a 28-tool turret magazine and left and right 36-tool tool stockers.","Conversation language is not available on the S700Xd2-100T; only NC language is available.","Chip conveyors can only be selected for the S700Xd2-100T.","Turret magazine tool change time is 0.7 s tool-to-tool and 1.4 s chip-to-chip.","Tool stocker handling time is approximately 5 s for one tool and approximately 140 s for all 28 tools.","Spindle options include 10,000 min-1 high-torque and 20,000 min-1 specifications in addition to the standard 12,000 min-1 specification.","CTS and BT dual contact spindle (BIG-PLUS) are optional.","Repeatability of bidirectional axis positioning is stated as less than 0.004 mm (ISO 230-2:2014).","Max tool weight is 3.0 kg for the turret magazine (4.0 kg with parameter change) and 4.0 kg for the tool stocker."],"safety_notes":["A safety fence is required when the optional side shutter is used.","A relocation detection device is required depending on the destination; machines with this device have RD at the end of the model name."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/sxd2/s300xd2","title":"S300Xd2 | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"brother","controllers":[],"weight_kg":2700,"travel_x_mm":700,"travel_y_mm":450,"travel_z_mm":380,"spindle_max_rpm":12000,"spindle_taper":"BT30","rapid_traverse_m_min":56,"tool_capacity":100,"table_length_mm":800,"table_width_mm":450,"table_load_kg":250,"joints":[],"protocols":["opc-ua"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-s700xd2-100t","license":"https://creativecommons.org/licenses/by/4.0/"}