# Brother S700Xd1

Hardware · `S700Xd1` · verification: source checked

The Brother S700Xd1 is a CNC machining center with X/Y/Z travels of 700/450/300 mm. It uses the CNC-D00 controller and a 10,000 min-1 spindle, and supports 14-, 21-, or 28-tool storage. It performs milling, drilling, and tapping operations on metal workpieces.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 5 |
| Weight | 2550 kg |
| Travel X | 700 mm |
| Travel Y | 450 mm |
| Travel Z | 300 mm |
| Spindle max | 10000 rpm |
| Spindle taper | MAS-BT30 |
| Rapid traverse | 56 m/min |
| Table length | 800 mm |
| Table width | 400 mm |
| Table load | 400 kg |
| Supply voltage | AC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2% |

## Connected

- Manufacturer: [Brother](https://machineschema.com/manufacturer/brother.md)
- Protocols: [EtherNet/IP](https://machineschema.com/protocol/ethernet-ip.md), [OPC UA](https://machineschema.com/protocol/opc-ua.md), [PROFINET](https://machineschema.com/protocol/profinet.md)

## Safety

- Max. table loading capacity is 250 kg as standard; 400 kg requires parameter change, and acceleration and positioning speed also change.
- Max. tool weight is 3.0 kg as standard; 4.0 kg requires parameter setting change, and tool magazine indexing time changes. Total tool weight limit is 25 kg for 14 tools and 35 kg for 21 or 28 tools.
- Coolant Through Spindle (CTS) cannot be selected for 27,000 min-1 specification models.
- Regular air pressure is 0.4–0.6 MPa (recommended 0.5 MPa); set pressure higher than recommended depending on machine specifications, machining program, or peripheral equipment.
- Relocation detection device may be required depending on destination; machines with it carry the RD suffix.

## Study notes

- CNC unit is CNC-D00 for S700Xd1; the S700Xd1-5AX uses CNC-D00v (DB).
- Tool storage capacities are 14, 21, or 28 tools.
- Tool change times are 0.6 s tool-to-tool and 1.2 s chip-to-chip with 14/21 tools; 0.7 s and 1.3 s with 28 tools.
- Spindle options: 16,000 min-1, 27,000 min-1, and 10,000 min-1 high-torque.
- Rapid traverse rates are X 50 m/min, Y 50 m/min, Z 56 m/min.
- Bidirectional axis positioning accuracy is 0.006–0.020 mm; repeatability is less than 0.004 mm (ISO 230-2).
- Main spindle motor output for the 10,000 min-1 specification is 10.1 kW (10 min) / 7.1 kW (continuous).
- Required floor space is 2,050 × 2,026 mm; 2,864 mm depth with control unit door open; machine height is 2,498 mm.
- Table work area is 800 × 400 mm; standard maximum load is 250 kg, with 400 kg available after parameter change.
- Memory capacity is 500 MB, with 3 GB optional; up to 4,000 programs can be registered (total program and data bank).
- OPC UA is listed; PROFINET slave and EtherNet/IP slave are optional.
- Simultaneous 5-axis functions on S700Xd1-5AX include tool center point control with 1,000-block look-ahead, submicron command, fixture coordinates setting, and 3 GB memory.

## Sources

1. [S700Xd1 | Machine Tools | Brother](https://machinetool.global.brother/en-us/all-products/sxd1/s700xd1) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/brother-s700xd1  
JSON: https://machineschema.com/hardware/brother-s700xd1.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.