{"id":"brother-s700xd1","model_id":"S700Xd1","name":"Brother S700Xd1","summary":"The Brother S700Xd1 is a CNC machining center with X/Y/Z travels of 700/450/300 mm. It uses the CNC-D00 controller and a 10,000 min-1 spindle, and supports 14-, 21-, or 28-tool storage. It performs milling, drilling, and tapping operations on metal workpieces.","study_notes":["CNC unit is CNC-D00 for S700Xd1; the S700Xd1-5AX uses CNC-D00v (DB).","Tool storage capacities are 14, 21, or 28 tools.","Tool change times are 0.6 s tool-to-tool and 1.2 s chip-to-chip with 14/21 tools; 0.7 s and 1.3 s with 28 tools.","Spindle options: 16,000 min-1, 27,000 min-1, and 10,000 min-1 high-torque.","Rapid traverse rates are X 50 m/min, Y 50 m/min, Z 56 m/min.","Bidirectional axis positioning accuracy is 0.006–0.020 mm; repeatability is less than 0.004 mm (ISO 230-2).","Main spindle motor output for the 10,000 min-1 specification is 10.1 kW (10 min) / 7.1 kW (continuous).","Required floor space is 2,050 × 2,026 mm; 2,864 mm depth with control unit door open; machine height is 2,498 mm.","Table work area is 800 × 400 mm; standard maximum load is 250 kg, with 400 kg available after parameter change.","Memory capacity is 500 MB, with 3 GB optional; up to 4,000 programs can be registered (total program and data bank).","OPC UA is listed; PROFINET slave and EtherNet/IP slave are optional.","Simultaneous 5-axis functions on S700Xd1-5AX include tool center point control with 1,000-block look-ahead, submicron command, fixture coordinates setting, and 3 GB memory."],"safety_notes":["Max. table loading capacity is 250 kg as standard; 400 kg requires parameter change, and acceleration and positioning speed also change.","Max. tool weight is 3.0 kg as standard; 4.0 kg requires parameter setting change, and tool magazine indexing time changes. Total tool weight limit is 25 kg for 14 tools and 35 kg for 21 or 28 tools.","Coolant Through Spindle (CTS) cannot be selected for 27,000 min-1 specification models.","Regular air pressure is 0.4–0.6 MPa (recommended 0.5 MPa); set pressure higher than recommended depending on machine specifications, machining program, or peripheral equipment.","Relocation detection device may be required depending on destination; machines with it carry the RD suffix."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/sxd1/s700xd1","title":"S700Xd1 | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":16,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"brother","controllers":[],"axes":5,"weight_kg":2550,"travel_x_mm":700,"travel_y_mm":450,"travel_z_mm":300,"spindle_max_rpm":10000,"spindle_taper":"MAS-BT30","rapid_traverse_m_min":56,"table_length_mm":800,"table_width_mm":400,"table_load_kg":400,"supply_voltage":"AC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2%","joints":[],"protocols":["opc-ua","profinet","ethernet-ip"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-s700xd1","license":"https://creativecommons.org/licenses/by/4.0/"}