{"id":"brother-m300xd2-5ax","model_id":"M300Xd2-5AX","name":"Brother M300Xd2-5AX","summary":"The Brother M300Xd2-5AX is a multi-tasking CNC machine that combines milling and turning on a tilting rotary table. It has five control axes (X, Y, Z, A and C), 300 x 440 x 380 mm linear travels, a standard 12,000 min-1 spindle and simultaneous 5-axis machining capability. It uses the CNC-D00v (DB) control and lists OPC UA communication.","study_notes":["CNC-D00v (DB) control; simultaneous 5-axis machining is available only on the M300Xd2-5AX.","Spindle options are 10,000 min-1 high-torque, 20,000 min-1 and 27,000 min-1; the standard spindle is 12,000 min-1.","Tool storage for the M300Xd2-5AX is 21 or 28 tools; the 64-tool magazine belongs to the M300Xd2-64T variants.","Table work area is 140 mm diameter with C-axis standard and 170 mm diameter with C-axis high-torque.","Maximum table load is 40 kg table side with C-axis standard, 75 kg table side with C-axis high-torque, and 19 kg tail side.","A-axis indexing feed is 60 min-1 with C-axis standard and 50 min-1 with C-axis high-torque; C-axis indexing feed is 200 min-1.","Required floor space is 1,590 x 2,697 mm for 21 tools and 1,300 x 2,667 mm for 28 tools, excluding coolant tank and chip conveyor.","Bidirectional positioning accuracy on X/Y/Z is 0.006-0.020 mm per ISO 230-2:1988; repeatability is less than 0.004 mm per ISO 230-2:2014.","Power capacity is 10.4 kVA continuous; air supply is 0.4-0.6 MPa at 165 L/min.","OPC UA is listed; Ethernet and USB are standard, RS232C is optional, and PROFINET/EtherNet/IP are optional slaves."],"safety_notes":["Tools 200 mm or longer may contact the jig when the magazine turns, depending on jig height.","For the 28-tool magazine, turning tools cannot be set in adjacent pods.","Maximum tool length, diameter and weight are limited by spindle speed, machine configuration and center of gravity; confirm details with the distributor.","The jig area has interference areas depending on axis movement and tool size; refer to Brother external views or interference diagrams.","Pallet clamp selection changes the table-top-to-spindle-nose distances; refer to Brother interference drawings.","A relocation detection device may be required depending on destination; machines with it carry the RD suffix.","Regular air pressure is 0.4-0.6 MPa with 0.5 MPa recommended; set pressure higher than recommended depending on machine specifications, program or peripherals."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/mxd2/m300xd2-5ax","title":"M300Xd2-5AX | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":15,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"brother","controllers":[],"axes":5,"repeatability_mm":0.004,"weight_kg":2750,"travel_x_mm":300,"travel_y_mm":440,"travel_z_mm":380,"spindle_max_rpm":12000,"spindle_taper":"MAS-BT30","rapid_traverse_m_min":50,"supply_voltage":"200 to 230 VAC ±10%, 3 phase, 50/60 Hz ±2%","joints":[{"name":"A","range_min_deg":-30,"range_max_deg":120}],"protocols":["opc-ua"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-m300xd2-5ax","license":"https://creativecommons.org/licenses/by/4.0/"}