{"id":"brother-m300xd1","model_id":"M300Xd1","name":"Brother M300Xd1","summary":"The Brother M300Xd1 is a CNC machining center with a tilting rotary table and a turning spindle. It performs turning, milling, and multi-face machining with five controlled axes and a 28-tool magazine. It uses the CNC-D00 control and is intended for relatively large parts.","study_notes":["M300Xd1 has a tilting rotary table with a turning spindle for combined turning and milling and multi-face machining.","The standard spindle speed is 10,000 min-1; an optional 16,000 min-1 spindle is listed.","Turning spindle maximum speed is 1,500 min-1; maximum torque is 102 N·m and maximum output is 9.9 kW.","C-axis clamp torque is 450 N·m; optional A-axis clamp torque is 800 N·m single or 1,080 N·m double.","Table work area is ø170 mm; maximum loading capacity is 75 kg on the table side and 19 kg on the tail side.","Tool storage is 28 tools standard or 22 optional; maximum tool length is 250 mm, diameter 80 mm, and weight 3 kg.","Positioning accuracy for X/Y/Z is 0.006–0.020 mm; repeatability is less than 0.004 mm for X/Y/Z and 16 sec or less for A/C.","CNC unit is CNC-D00 for M300Xd1 and CNC-D00v (DB) for M300Xd1-5AX.","Memory capacity is 500 Mbytes standard or 3 Gbytes optional; 4,000 programs can be registered.","Main spindle motor is rated 10.1 kW for 10 min and 7.0 kW continuous; maximum output is 18.9 kW and maximum torque is 40 N·m.","External communication includes USB memory, Ethernet, and optional RS232C; optional fieldbus slaves include PROFINET and EtherNet/IP.","Required floor space is 1,520 x 2,667 mm and machine height is 2,733 mm."],"safety_notes":["Tools 200 mm or longer may contact the jig when the magazine turns, depending on jig height.","With the 28-tool magazine, turning tools cannot be set in adjacent pods.","Tail-side loading capacity is 13 kg at the rotating section and 6 kg at the fixed section.","Regular air pressure range is 0.4–0.6 MPa; recommended value is 0.5 MPa.","The machine may require a relocation detection device depending on destination; RD models include it."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/mxd1/m300xd1","title":"M300Xd1 | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"brother","controllers":[],"axes":5,"weight_kg":2850,"travel_x_mm":300,"travel_y_mm":440,"travel_z_mm":380,"spindle_max_rpm":10000,"spindle_taper":"MAS-BT30","rapid_traverse_m_min":50,"tool_capacity":28,"table_load_kg":75,"supply_voltage":"AC 200 to 230 V±10%, 3-phase, 50/60Hz±2%","joints":[],"protocols":["opc-ua"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-m300xd1","license":"https://creativecommons.org/licenses/by/4.0/"}