# Brother M300Xd1-5AX

Hardware · `M300Xd1-5AX` · verification: source checked

Brother SPEEDIO M300Xd1-5AX is a 5-axis CNC machining center with a tilting rotary table and a turning spindle. It performs milling and turning operations in one setup, with travels of 300 mm (X), 440 mm (Y) and 380 mm (Z). It has a 10,000 min-1 milling spindle, a 28-tool magazine and simultaneous five-axis control for multi-face machining.

## Specification

| Property | Value |
|---|---|
| Category | cnc multitasking |
| Axes | 5 |
| Weight | 2850 kg |
| Travel X | 300 mm |
| Travel Y | 440 mm |
| Travel Z | 380 mm |
| Spindle max | 10000 rpm |
| Spindle power | 18.9 kW |
| Spindle taper | MAS-BT30 |
| Rapid traverse | 50 m/min |
| Tool capacity | 28 |
| Table load | 75 kg |
| Supply voltage | AC 200 to 230 V±10%, 3-phase, 50/60Hz±2% |

## Connected

- Manufacturer: [Brother](https://machineschema.com/manufacturer/brother.md)
- Protocols: [OPC UA](https://machineschema.com/protocol/opc-ua.md)

## Safety

- Tools with a length of 200 mm or more may contact the jig when the magazine turns, depending on the jig height.
- For the 28-tool magazine, turning tools cannot be set in adjacent pods.
- The tail-side table loading capacity is 19 kg (13 kg rotating section + 6 kg fixed section), lower than the table-side capacity.
- Regular air pressure is 0.4-0.6 MPa (recommended 0.5 MPa); set the pressure higher than the recommended value.
- A relocation detection device may be required depending on the destination; machines equipped with it have the RD suffix.
- There is some interference area; the document refers to Table Details for the interference area.
- Max tool weight is 3 kg, with total tool weight 40 kg.

## Study notes

- CNC unit for the M300Xd1-5AX is CNC-D00v(DB); the display is a 15-inch color LCD touch panel. Memory capacity is 3 Gbytes.
- Control axes are X, Y, Z, A and C. A-axis range is -30 to 120 deg; C-axis indexing range is 360 deg.
- Spindle speed range is 1-10,000 min-1 standard; a 16,000 min-1 spindle is optional. Milling spindle max torque is 40 N·m.
- Main spindle motor is 10.1 kW (10 min) / 7.0 kW continuous with the 10,000 min-1 specification.
- Turning spindle for M300Xd1: max speed 1,500 min-1, max torque 102 N·m, max output 9.9 kW, motor 4.6 kW.
- Tool-to-tool time is 0.8 s and chip-to-chip time is 1.5 s for the M300Xd1-5AX. Tool storage is 28 standard; a 22-tool magazine is optional.
- Max tool length is 250 mm and max tool diameter is 80 mm.
- Table work area is ø170 mm. Max table load is 75 kg on the table side and 19 kg on the tail side (13 kg rotating section + 6 kg fixed section). Max table load inertia is 0.8 kg·m² table side and 0.04 kg·m² tail side.
- Bidirectional positioning accuracy is X/Y/Z 0.006-0.020 mm and A/C 28 sec or less; repeatability is X/Y/Z less than 0.004 mm and A/C 16 sec or less (ISO 230-2:2014).
- Required floor space is 1,520 x 2,667 mm, height 2,733 mm and weight 2,850 kg. Continuous power capacity is 9.5 kVA; air supply is 0.4-0.6 MPa at 175 L/min.
- C-axis clamp torque is 450 N·m. A-axis clamp is optional with 800 N·m single or 1,080 N·m double clamp torque.
- OPC UA is standard. Optional network slaves are CC-Link, PROFIBUS DP, DeviceNet, PROFINET and EtherNet/IP; RS232C is optional.

## Sources

1. [M300Xd1-5AX | Machine Tools | Brother](https://machinetool.global.brother/en-us/all-products/mxd1/m300xd1-5ax) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/brother-m300xd1-5ax  
JSON: https://machineschema.com/hardware/brother-m300xd1-5ax.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.