{"id":"brother-m300xd1-5ax","model_id":"M300Xd1-5AX","name":"Brother M300Xd1-5AX","summary":"Brother SPEEDIO M300Xd1-5AX is a 5-axis CNC machining center with a tilting rotary table and a turning spindle. It performs milling and turning operations in one setup, with travels of 300 mm (X), 440 mm (Y) and 380 mm (Z). It has a 10,000 min-1 milling spindle, a 28-tool magazine and simultaneous five-axis control for multi-face machining.","study_notes":["CNC unit for the M300Xd1-5AX is CNC-D00v(DB); the display is a 15-inch color LCD touch panel. Memory capacity is 3 Gbytes.","Control axes are X, Y, Z, A and C. A-axis range is -30 to 120 deg; C-axis indexing range is 360 deg.","Spindle speed range is 1-10,000 min-1 standard; a 16,000 min-1 spindle is optional. Milling spindle max torque is 40 N·m.","Main spindle motor is 10.1 kW (10 min) / 7.0 kW continuous with the 10,000 min-1 specification.","Turning spindle for M300Xd1: max speed 1,500 min-1, max torque 102 N·m, max output 9.9 kW, motor 4.6 kW.","Tool-to-tool time is 0.8 s and chip-to-chip time is 1.5 s for the M300Xd1-5AX. Tool storage is 28 standard; a 22-tool magazine is optional.","Max tool length is 250 mm and max tool diameter is 80 mm.","Table work area is ø170 mm. Max table load is 75 kg on the table side and 19 kg on the tail side (13 kg rotating section + 6 kg fixed section). Max table load inertia is 0.8 kg·m² table side and 0.04 kg·m² tail side.","Bidirectional positioning accuracy is X/Y/Z 0.006-0.020 mm and A/C 28 sec or less; repeatability is X/Y/Z less than 0.004 mm and A/C 16 sec or less (ISO 230-2:2014).","Required floor space is 1,520 x 2,667 mm, height 2,733 mm and weight 2,850 kg. Continuous power capacity is 9.5 kVA; air supply is 0.4-0.6 MPa at 175 L/min.","C-axis clamp torque is 450 N·m. A-axis clamp is optional with 800 N·m single or 1,080 N·m double clamp torque.","OPC UA is standard. Optional network slaves are CC-Link, PROFIBUS DP, DeviceNet, PROFINET and EtherNet/IP; RS232C is optional."],"safety_notes":["Tools with a length of 200 mm or more may contact the jig when the magazine turns, depending on the jig height.","For the 28-tool magazine, turning tools cannot be set in adjacent pods.","The tail-side table loading capacity is 19 kg (13 kg rotating section + 6 kg fixed section), lower than the table-side capacity.","Regular air pressure is 0.4-0.6 MPa (recommended 0.5 MPa); set the pressure higher than the recommended value.","A relocation detection device may be required depending on the destination; machines equipped with it have the RD suffix.","There is some interference area; the document refers to Table Details for the interference area.","Max tool weight is 3 kg, with total tool weight 40 kg."],"sources":[{"url":"https://machinetool.global.brother/en-us/all-products/mxd1/m300xd1-5ax","title":"M300Xd1-5AX | Machine Tools | Brother","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":14,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"brother","controllers":[],"axes":5,"weight_kg":2850,"travel_x_mm":300,"travel_y_mm":440,"travel_z_mm":380,"spindle_max_rpm":10000,"spindle_power_kw":18.9,"spindle_taper":"MAS-BT30","rapid_traverse_m_min":50,"tool_capacity":28,"table_load_kg":75,"supply_voltage":"AC 200 to 230 V±10%, 3-phase, 50/60Hz±2%","joints":[],"protocols":["opc-ua"],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/brother-m300xd1-5ax","license":"https://creativecommons.org/licenses/by/4.0/"}