# Brother M200Xd1-5AX

Hardware · `M200Xd1-5AX` · verification: source checked

The Brother M200Xd1-5AX is a five-axis machining center with a tilting rotary table and a turning spindle. It combines turning and milling operations in one setup, with X/Y/Z travels of 200/440/305 mm. It uses a 10,000 min-1 milling spindle and a 2,000 min-1 turning spindle.

## Specification

| Property | Value |
|---|---|
| Category | cnc multitasking |
| Axes | 5 |
| Repeatability | 0.004 mm |
| Weight | 2700 kg |
| Travel X | 200 mm |
| Travel Y | 440 mm |
| Travel Z | 305 mm |
| Spindle max | 10000 rpm |
| Spindle power | 18.9 kW |
| Spindle taper | MAS-BT30 |
| Rapid traverse | 50 m/min |
| Tool capacity | 28 |
| Table load | 40 kg |
| Supply voltage | AC 200 to 230 V ±10%, 3-phase, 50/60 Hz ±2% |

## Connected

- Manufacturer: [Brother](https://machineschema.com/manufacturer/brother.md)
- Protocols: [OPC UA](https://machineschema.com/protocol/opc-ua.md)

## Safety

- Tools with a length of 200 mm or more may contact the jig when the magazine turns, depending on the jig height.
- For the 28-tool magazine, turning tools cannot be set in adjacent pods.
- Regular air pressure must be 0.4 to 0.6 MPa (recommended 0.5 MPa); set the pressure higher than the recommended value.
- Depending on the destination, the machine needs a relocation detection device; machines with this device have RD at the end of the model name.
- The maximum number of control axes differs by destination country and machine specifications.

## Study notes

- The M200Xd1-5AX uses CNC-D00v (DB); the M200Xd1 and M300Xd1 use CNC-D00.
- A-axis travel is -30 to 120 degrees; C-axis travel is 360 degrees.
- The turning spindle maximum speed is 2,000 min-1 for the M200Xd1.
- Optional equipment includes a 16,000 min-1 milling spindle and a 22-tool magazine.
- Maximum tool length is 250 mm, maximum tool diameter is 80 mm, and maximum tool weight is 3 kg with 40 kg total tool weight.
- Maximum milling spindle torque is 40 N·m.
- C-axis clamp torque is 345 N·m; A-axis clamp torque is 695 N·m single and 975 N·m double for the M200Xd1.
- The table work area is ø140 mm; table-side loading capacity is 40 kg and tail-side capacity is 19 kg (13 kg rotating, 6 kg fixed).
- Bidirectional positioning accuracy is 0.006 to 0.020 mm for X/Y/Z and 28 sec or less for A/C; repeatability is less than 0.004 mm for X/Y/Z and 16 sec or less for A/C.
- The CNC memory capacity for the 5AX is 3 Gbytes, with up to 4,000 registrable programs.
- External communication includes USB memory interface and Ethernet, with RS232C optional.
- Machine height is 2,612 mm, required floor space is 1,280 x 2,667 mm, and weight is 2,700 kg; continuous power capacity is 9.5 kVA.

## Sources

1. [M200Xd1-5AX | Machine Tools | Brother](https://machinetool.global.brother/en-us/all-products/mxd1/m200xd1-5ax) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/brother-m200xd1-5ax  
JSON: https://machineschema.com/hardware/brother-m200xd1-5ax.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.