{"id":"tormach-pathpilot-operator-console","model_id":"PathPilot Operator Console","name":"Tormach PathPilot Operator Console","summary":"The PathPilot Operator Console is an all-in-one control unit for Tormach M, M+, and MX CNC mills. It runs the PathPilot control software and provides a touchscreen, front-panel hardware knobs for feed rate, spindle RPM and maximum velocity overrides, and Cycle Start and Feedhold buttons. A handheld jog pendant with a three-position increment selector allows manual positioning of the machine axes.","study_notes":["PathPilot software is installed on the console.","Storage capacity 40 GB; RAM 4 GB.","17 in. (43 cm) diagonal touchscreen.","Jog pendant covers X-, Y-, Z- and A-axes with three jog size increments from 0.0001 in. to 0.01 in.","Override knobs for feed rate, RPM and maximum velocity range from 0% to 200%.","Two front USB ports for USB thumb drives and file transfer.","Wireless-N Wi-Fi adapter is included.","Compatible machines: 1100MX, 1100M+, 1100M, 770MX, 770M+, 770M.","Requires a Tormach M, M+ or MX CNC mill with Ethernet control and a machine enclosure.","Included items: machine controller, jog pendant, Wi-Fi adapter, power adapter, controller enclosure mount and controller wire kit."],"safety_notes":["Hardware E-Stop and machine reset buttons are located on the front panel.","Installation requires a machine enclosure."],"sources":[{"url":"https://tormach.com/media/asset/p/a/pathpilot_operator_console_tear_sheet_0221_1.pdf","title":"pathpilot operator console tear sheet 0221 1","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":4,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"controller","spec":{"manufacturer":"tormach","kind":"cnc_control","series":"PathPilot","weight_kg":27,"input_voltage":"115Vac or 230Vac","protocols":[],"standards":[]},"url":"https://machineschema.com/controller/tormach-pathpilot-operator-console","license":"https://creativecommons.org/licenses/by/4.0/"}